Product Description
Product Specs
- 2x10 SFP+ electrical interface with LC/UPC (Blue Latch) or SC/APC (Green Latch) receptacle optical interface
- Single fiber XGS-PON ONT/ONU Transceiver
- 1270nm burst-mode 9.95328Gbps, transmitter with DFB laser
- 1577nm continuous-mode 9.95328Gbps, APD/TIA receiver
- Tx power is 4~9 dBm
- receiver sensitivity -28 dBm, BER<1E-3
- Reach up to 40km
- Single +3.3V DC power supply
- Supports Digital diagnostic monitoring (DDM), with internal calibration
- Operating case temperature:
- Commercial Temp. 0-70 °C
- Industrial (Hardened) -40 to 85 °C
- ITU-T G.9807, and RoHS-6 compliant
For XGS-PON SFP+ stick module, please consult our XGSPON SFP+ stick
Customers Also Viewed
XGS-PON ONT/ONU SFP+ with SC/APC Connector
Product Specs 2x10 SFP+ electrical interface with LC/UPC (Blue Latch) or SC/APC (Green Latch) receptacle optical interface Single fiber XGS-PON ONT/ONU Transceiver 1270nm burst-mode 9.95328Gbps,...
400G-LR4 QSFP-DD transceiver, 10km over duplex SMF, LC Connector
400GBASE-FR4 transceiver, up to 10km over duplex SMF, LC Connector, EML CWDM4 PRODUCT FEATURES QSFP-DD MSA compliant 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-LR4 Specification...
QSFP-DD 4x 100G FR1 optical transceiver Parallel SMF MPO-12 Angled Connector (APC)
400GBASE-DR4 QSFP-DD transceiver, up to 2km over parallel single mode fiber (SMF). The 400G-xDR4 can break out to 4 x 100G, and interop with 4 x 100G-FR QSFPs. Parallel SMF MPO-12 Angled Connector...
QSFP28-SR4 module, 100GBASE-SR4 850nm MMF 100m, with MPO Connector
100 Gigabit SR4 QSFP28 Transceiver | 100m MM 850nm 100 Gigabit SR4 QSFP28 Transceiver - 100m MM 850nm, with Monitoring (DDM / DOM), Standard MSA Multimode Transceiver for 100Gigabit Ethernet LAN...
QSFP-DD 4x 100G LR1 optical transceiver , 10km, SMF MPO-12 Angled Connector (APC)
400G-PLR4 or 4x100G QSFP-DD transceiver, up to 10km over parallel single mode fiber (SMF). The 400G-PLR4 can break out to 4 x 100G, and interop with 4 x 100G-LR1 QSFP28. Parallel SMF MPO-12 Angled...
400G-FR4 QSFP-DD transceiver, 2km over duplex SMF, LC Connector, EML CWDM4
400GBASE-FR4 transceiver, up to 2km over duplex SMF, LC Connector, EML CWDM4 PRODUCT FEATURES QSFP-DD MSA compliant 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-FR4 Specification...
HPE ARUBA JH231A 40GBASE-SR4 QSFP,4-lanes, 850nm MMF 150m, with MPO Connector
HPE X142 40G QSFP+ MPO SR4 Transceiver Tested & Proven switch# show interface transceiver------------------------------------------------------------Port Type Product Serial Part Number Number...
XGS-PON SFP+ Stick Module, XGSPON ONT w/t MAC function mounted on SFP+ package
XGS-PON SFP+ ONT w/t MAC function (SFP+ stick) XGS-PON ONT with MAC function mounted into a standard SFP+ package.(Class N1) EN-XGSFPP-OMAC is delivered with one SFP+ (Small Form-factor Pluggable)...
Edgecore 5835-54X 10G/100G DATA CENTER SWITCH 48x10G SFP+ with 6x40/100G QSFP+ uplinks, Trident III (TD3)
Product Overview The Edgecore AS5835-54X switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. The AS5835-54X provides full...
Intelligent 10/100/1000 Ethernet Tap
Main Features Standard Network TAP (Online Monitor)Tap is inserted inline (Network ports A and B) and will collect traffic from a network link and allow you to monitor the data traffic into duplex...
Agema Delta AG9064 64X100G QSFP28 SWITCH Broadcom Tomahawk2
The AG9064 with Broadcom Tomahawk2 provides 64 low latency 100GbE QSFP28 port connectivity. 2RU high-density 64X100GE QSFP28 ports. The device is pre-loaded with ONIE (Open Network...
TAPstack device with Multimode 1G/10G/25G SR Passive fiber TAPs
TAPstack is a Cost-Effective Family of TAP to improve network visibility in less space Key Features: 100% passive and fault-tolerant; No impact on traffic; No power source required. Secure: no...