Product Description
The ASXvOLT16 is a 16-10G-port XGS-PON virtual Optical Line Terminal (vOLT) with 4 x 100G/40G QSFP28 fixed ports. The 10G ports, 100G uplink ports, and console/management USB ports are all on the front panel. All 10G ports operate at wire-speed by default and support standard XGS-PON transceivers. The QSFP28 ports support 100G and 40G operation modes, as well as being configurable as 4 x 25GbE or 4 x10 GbE modes using DAC breakout cables. This vOLT supports redundant hot-swappable PSUs and fans, and is available with a front-to-back or back-to-front airflow direction.
Edgecore open OLTs include the open source software components ONIE, Open Network Linux, Open Optical Monitoring (OOM) API, the Redfish hardware management API, and the OpenOLT Adapter (vOLTHA driver) for operation in SDN Enabled Broadband Access (SEBA) or R-CORD open infrastructures defined through the Open Network Foundation (ONF).
Key Features and Benefits
- 4 x QSFP28 switch ports, each supporting 1 x 100 GbE or 1 x 40 GbE, or via breakout cables 2 x 50 GbE, 4 x 25 GbE, or 4 x 10 GbE.
- Layer 2 or Layer 3 forwarding at 300 Gbps (full duplex).
- Supports hot/cold aisles with front-to-back airflow SKU.
- All ports on front; PSUs and fans accessible from rear.
- Hot-swappable, load-sharing, redundant AC or -48V DC PSUs.
- 5+1 redundant, hot-swappable fan modules.
- Handles the abstraction between the protocol and the native hardware RPC.
- Bare-Metal hardware switch pre-loaded with diagnostics software and with Open Network Install Environment (ONIE) for automated loading of compatible open source and commerical NOS offerings.
| Traditional PON | vOLT with VOLTHA | ||
|---|---|---|---|
| Orchestration (XOS)(e.g. services added or subtracted) | Proprietary connectivity to OSS/BSS | Open Orchestration | Flexible and instant creation of virtual services. Demand and technology improvements can be kept up with by using virtual methods through the “cloudification” of the network (Services, subscriber gear (CPE) and OLT are all virtualized above the controller layer.) |
| Management Platform (Proprietary vs. Open) | Proprietary Management Software | Open Control Software (ONOS) | Network centric view of data flow – data flows can be controlled with a bird’s eye view for optimal flows.Reduced OPEX using the same control platform across the entire network – the days of multiple different proprietary control platforms are over. |
| Hardware Adapters (Proprietary vs. Open) | None – end-to-end proprietary software. | Open Common vOLTHA | Any underlying vOLT hardware can be used with vOLTHA – think of it as similar to a plug and play environment. |
| Hardware (Proprietary Chassis vs. Open Commodity 1 RU Blades) | Proprietary Single Vendor Hardware | Open – Any Vendor Hardware | Hardware becomes a commodity – reduced CAPEX when hardware vendors produce generic PON equipment controlled through openFlow. |
Download Datasheet
Related Products
SFP+ 10GBASE-SR MMF, 850nm, 300m
Features: Form Type SFP+ Max Data Rate 10.3125Gbps Wavelength 850nm Max Cable Distance* 300m over OM3 MMF Interface LC duplex Optical Components VCSEL 850nm Cable Type MMF DOM Support...
XGS-PON ONT/ONU SFP+ with SC/APC Connector
Product Specs 2x10 SFP+ electrical interface with LC/UPC (Blue Latch) or SC/APC (Green Latch) receptacle optical interface Single fiber XGS-PON ONT/ONU Transceiver 1270nm burst-mode 9.95328Gbps,...
Single rate Ethernet 100G QSFP28 Module 100GBASE-LR4, Single Mode, 10Km
100 Gigabit LR4 QSFP28 Transceiver | 10km SM 1295, 1300, 1305 & 1310nm Single Rate 100 Gigabit LR4 QSFP28 Transceiver - 10km SM 1295, 1300, 1305 & 1310nm, with Monitoring (DDM / DOM),...
XGS-PON SFP+ Stick Module, XGSPON ONT w/t MAC function mounted on SFP+ package
XGS-PON SFP+ ONT w/t MAC function (SFP+ stick) XGS-PON ONT with MAC function mounted into a standard SFP+ package.(Class N1) EN-XGSFPP-OMAC is delivered with one SFP+ (Small Form-factor Pluggable)...
Custom XGS-PON SFP+ Stick Module, XGSPON ONT w/t MAC function mounted on SFP+ package
XGS-PON SFP+ ONT w/t MAC function (SFP+ stick) Local Management through Telnet and Web Interface Allow to change the MAC, and SN. PON Interface Compliant with ITU-T G.9807.1 XG
SFP+ XGS COMBO PON N2/C+ OLT Transceiver, 20PIN, I-Temp
Product Specs Part Description MPN Wave Length
Customers Also Viewed
XGS-PON ONT/ONU SFP+ with SC/APC Connector
Product Specs 2x10 SFP+ electrical interface with LC/UPC (Blue Latch) or SC/APC (Green Latch) receptacle optical interface Single fiber XGS-PON ONT/ONU Transceiver 1270nm burst-mode 9.95328Gbps,...
Edgecore Cassini AS7716-24SC 100GBE COHERENT SWITCH
The Cassini packet transponder enables network operators to easily extend and migrate existing metro and long-haul Dense Wavelength Division Multiplexing (DWDM) networks to add new 100G...
CyberMapper RTU Software license for Barefoot Tofino-64-based switches
CyberMapper Solution Requirements: § CyberMapper s/w running on a standard server (4-core X86 with mimum 16GB RAM, or better) § One or more NoviWare capable switches (Intel/Barefoot...
Edgecore AS5912-54X Baremetal Switch 48x10G SFP+, 6x100GE uplinks, BMC Qumran MX
Part Number Description: AS5912-54X, 48-Port 10G SFP+ with 6x100G QSFP28 uplinks, ONIE software installer, Broadcom Qumran 800Gbps with 8GB packet buffer, Intel Atom C2538 CPU,...
XGS-PON SFP+ Stick Module, XGSPON ONT w/t MAC function mounted on SFP+ package
XGS-PON SFP+ ONT w/t MAC function (SFP+ stick) XGS-PON ONT with MAC function mounted into a standard SFP+ package.(Class N1) EN-XGSFPP-OMAC is delivered with one SFP+ (Small Form-factor Pluggable)...
Edgecore AS4610-54P 1GBE with POE+ SWITCH
AS4610-54P has 48-Port GE RJ45 port w/ POE+, incl. 8 ports UPOE and 4x10G SFP+, 2 port QSFP+ by DAC or 20G QSFP+ Transceiver. AS4610-54P embedded Broadcom Helix 4 and Dual-core ARM Cortex A9...
EdgeCore 7712-32X 32-Port 100GBE QSFP28 SWITCH BRCM Tomahawk
Part Number Description: 32-Port 100GbE QSFP28 switch, ONIE software installer,BRCM Tomahawk with Intel Atom CPU, dual AC PSUs, power-to-port airflow, N. America power cord. 3-year...
Agema Delta AG9064 64X100G QSFP28 SWITCH Broadcom Tomahawk2
The AG9064 with Broadcom Tomahawk2 provides 64 low latency 100GbE QSFP28 port connectivity. 2RU high-density 64X100GE QSFP28 ports. The device is pre-loaded with ONIE (Open Network...
Edgecore AS6712-32X 40GBE DATA CENTER SWITCH 32-Port 40G QSFP+, Trident II
AS6712-32X is a 32-Port 40G QSFP+ switch with ONIE software installer. AS6712-32X embedded Broadcom Trident II 1.28Tbps and Intel Atom C2538 CPU as well as dual 110-230VAC 400W PSUs included and...
HPE BladeSystem 455886-B21 Compatible 10GBASE-LR SFP+ 1310nm 10km DDM Transceiver Module
455886-B21 Compatible 10GBASE-LR SFP+ Transceiver Module (SMF, 1310nm, 10km, LC, DOM) Features SFP+ form factor 10G Ethernet transmission speed Low power consumption at <0.8W for SR,...
WEDGE 100BF-65X 100GBE Baremetal Switch with programmable Tofino
Wedge100 65-Port 100GbE QSFP28 switch, dual AC PSUs, port-to-power airflow, no power cords.Supplied software: ONIE, OpenBMC, Diagnostics tool. 3-year Hardware Warranty Product Overview The...
32 x 400G QSFP-DD Switch Baremetal Switch with programmable Broadcom Trident 4
Product Overview S9310-32D 32 x 400G QSFP-DD Switch 32-port 400GE QSFP-DD 6-port 10GE SFP+ 1 10/100/1000 RJ-45 Mgt. port 1 x RJ45 + Micro USB serial console ports 1 x...