
QSFP28-SR4 module, 100GBASE-SR4 850nm MMF 100m, with MPO Connector
- SKU:
- EN-Q28-SR4-S
- Condition:
- New
- Minimum Purchase:
- 2 units
- Shipping:
- Calculated at Checkout
- Bulk Pricing:
- Buy in bulk and save
Product Description
100 Gigabit SR4 QSFP28 Transceiver | 100m MM 850nm
100 Gigabit SR4 QSFP28 Transceiver - 100m MM 850nm, with Monitoring (DDM / DOM), Standard MSA Multimode Transceiver for 100Gigabit Ethernet LAN with MPO connector. They can be used in virtually any type of communication systems (e.g. routers, switches, converters, hubs, bridges, NICs, gateways, proxies, load balancers, etc.).
Features
- The hot pluggable EN-QSFP28-SR4 form is part of the Universal QSFP28 Transceiver family and is therefore ideal for flexible and cost-optimized high-speed optical network deployments.
- The MM 850nm VCSEL optic with PIN receiver complies with Class 1 Standard of the International Safety Standard IEC60825
- Offers a power budget of 1.9dB for distances of up to 100m via OM4 @ 4700MHz Multimode fiber.
- The system status of the Universal QSFP28 can be monitored in real time via the transceiver´s dynamic monitoring data (also known as DDM or DOM).
- Parameters which can be monitored are; transmitter power level, receiver sensitivity and the operating temperature.
Technical Specifications
Direct or within rack cabling (Intra-Rack) examples
Multimode 100G Connectivity using MTP fiber patch cable
The following figure shows a direct connectivity between two switches using 100GBASE-SR4 QSFP28 transceivers connected by 1x multi-mode MTP to MTP patch cable.
Item Number |
Item Description |
Part Number |
1 |
QSFP28 Cisco QSFP-100G-SR4-S Compatible 100GBASE-SR4 850nm 100m Transceiver |
|
2 |
3m (10ft) MTP Female to MTP Female 12 Fibers OM4 50/125 Multimode Trunk Cable, Polarity B, Elite, Plenum (OFNP) Bunch |
|
3 |
QSFP28 Cisco QSFP-100G-SR4-S Compatible 100GBASE-SR4 850nm 100m Transceiver |
Connectivity example within a rack (Intra-Rack) using MTP-MTP fiber cable
High Density Multimode 100G Connections using MTP trunk cable
For Multiple 100G ports direct connectivity, a MTP Female to Female 72 Fibers OM4 50/125 Multimode 12 Strands Trunk Cable can be used.
This solution is an efficient, flexible and easy-install for High Density fiber cable management in data center or labs.

Customers Also Viewed
HPE ARUBA JH231A 40GBASE-SR4 QSFP,4-lanes, 850nm MMF 150m, with MPO Connector
HPE X142 40G QSFP+ MPO SR4 Transceiver Tested & Proven switch# show interface transceiver------------------------------------------------------------Port Type Product Serial Part Number Number...
XGS-PON ONT/ONU SFP+ with SC/APC Connector
Product Specs 2x10 SFP+ electrical interface with LC/UPC (Blue Latch) or SC/APC (Green Latch) receptacle optical interface Single fiber XGS-PON ONT/ONU Transceiver 1270nm burst-mode 9.95328Gbps,...
Single rate Ethernet 100G QSFP28 Module 100GBASE-LR4, Single Mode, 10Km
100 Gigabit LR4 QSFP28 Transceiver | 10km SM 1295, 1300, 1305 & 1310nm Single Rate 100 Gigabit LR4 QSFP28 Transceiver - 10km SM 1295, 1300, 1305 & 1310nm, with Monitoring (DDM / DOM),...
Intelligent 10/100/1000 Ethernet Tap
Main Features Standard Network TAP (Online Monitor)Tap is inserted inline (Network ports A and B) and will collect traffic from a network link and allow you to monitor the data traffic into duplex...
EdgeCore 7712-32X 32-Port 100GBE QSFP28 SWITCH BRCM Tomahawk
Part Number Description: 32-Port 100GbE QSFP28 switch, ONIE software installer,BRCM Tomahawk with Intel Atom CPU, dual AC PSUs, power-to-port airflow, N. America power cord. 3-year...
HPE J9151A Compatible 10GBASE-LR SFP+ 1310nm 10km DDM Transceiver Module
HPE J9151A Compatible 10GBASE-LR SFP+ Transceiver Module (SMF, 1310nm, 10km, LC, DOM) Features SFP+ form factor 10G Ethernet transmission speed Low power consumption at <0.8W for SR, <1W...
WEDGE 100BF-65X 100GBE Baremetal Switch with programmable Tofino
Wedge100 65-Port 100GbE QSFP28 switch, dual AC PSUs, port-to-power airflow, no power cords.Supplied software: ONIE, OpenBMC, Diagnostics tool. 3-year Hardware Warranty Product Overview The...
Edgecore AS5912-54X Baremetal Switch 48x10G SFP+, 6x100GE uplinks, BMC Qumran MX
Part Number Description: AS5912-54X, 48-Port 10G SFP+ with 6x100G QSFP28 uplinks, ONIE software installer, Broadcom Qumran 800Gbps with 8GB packet buffer, Intel Atom C2538 CPU,...
TAPstack device with Multimode 1G/10G/25G SR Passive fiber TAPs
TAPstack is a Cost-Effective Family of TAP to improve network visibility in less space Key Features: 100% passive and fault-tolerant; No impact on traffic; No power source required. Secure: no...
HPE BladeSystem 455886-B21 Compatible 10GBASE-LR SFP+ 1310nm 10km DDM Transceiver Module
455886-B21 Compatible 10GBASE-LR SFP+ Transceiver Module (SMF, 1310nm, 10km, LC, DOM) Features SFP+ form factor 10G Ethernet transmission speed Low power consumption at <0.8W for SR,...
Edgecore Cassini AS7716-24SC 100GBE COHERENT SWITCH
The Cassini packet transponder enables network operators to easily extend and migrate existing metro and long-haul Dense Wavelength Division Multiplexing (DWDM) networks to add new 100G...
Edgecore AS4610-54P 1GBE with POE+ SWITCH
AS4610-54P has 48-Port GE RJ45 port w/ POE+, incl. 8 ports UPOE and 4x10G SFP+, 2 port QSFP+ by DAC or 20G QSFP+ Transceiver. AS4610-54P embedded Broadcom Helix 4 and Dual-core ARM Cortex A9...