
Single rate Ethernet 100G QSFP28 Module 100GBASE-LR4, Single Mode, 10Km
- SKU:
- EN-Q28-LR4-S
- Condition:
- New
- Shipping:
- Calculated at Checkout
- Bulk Pricing:
- Buy in bulk and save
Product Description
100 Gigabit LR4 QSFP28 Transceiver | 10km SM 1295, 1300, 1305 & 1310nm
Single Rate 100 Gigabit LR4 QSFP28 Transceiver - 10km SM 1295, 1300, 1305 & 1310nm, with Monitoring (DDM / DOM), Standard MSA Singlemode Transceiver for 100Gigabit Ethernet LAN and 100G EDR with LC connector. They can be used in virtually any type of communication systems (e.g. routers, switches, converters, hubs, bridges, NICs, gateways, proxys, load balancers, etc.).
Features
- Part of the Universal QSFP28 Transceiver family and is therefore ideal for flexible and cost-optimized high-speed optical network deployments.
- The SM 1295, 1300, 1305 & 1310nm EML optic with PIN receiver complies with Class 1 Standard of the International Safety Standard IEC60825
- Offers a power budget of 4.3dB for distances of up to 10km via G.652 Singlemode fiber.
- The system status of the Universal QSFP28 can be monitored in real time via the transceiver´s dynamic monitoring data (also known as DDM or DOM).
- Parameters which can be monitored are; transmitter power level, receiver sensitivity and the operating temperature.
- FORM FACTOR TYPE QSFP28
- INTERFACE Singlemode
- WAVELENGTH TX 1295.56nm
- WAVELENGTH RX 1310nm
- DISTANCE 10km
- POWERBUDGET (DB) 4.30dB
- PROTOCOLS 100Gigabit Ethernet LAN
- CONNECTOR LC
- WAVELENGTH TX MIN. 1294.53nm
- WAVELENGTH TX MAX. 1296.59nm
- WAVELENGTH RX MIN. 1294.56nm
- WAVELENGTH RX MAX. 1310.19nm
- TRANSMIT MIN. -4.30dBm
- TRANSMIT MAX. 4.50dBm
- RECEIVE MIN. -8.60dBm
- RECEIVE MAX. (RECEIVER OVERLOAD) 4.50dBm
- TEMPERATURE (MIN) 0°C
- TEMPERATURE (MAX) 70°C
- TYPE OF DDM / DOM internal
- EXTINCTION RATIO 4dB
Direct or within rack cabling (Intra-Rack) examples
Singlemode 100GBASE-LR4 Connectivity using Fiber Patch Cable
The following Figure shows a direct connectivity between two switches using 100GBASE-LR4 QSFP28 transceivers connected by 1x single mode LC to LC fiber patch cable.
Item Number | Item Description | Part Number |
1 | Cisco QSFP-100G-LR4-S Compatible Ethernet 100G QSFP28 Module 100GBASE-LR4, Single Mode, 10Km | |
2 | LC UPC to LC UPC Duplex 2.0mm OFNP 9/125 Single Mode Fiber Patch Cable, 3m | |
3 | Cisco QSFP-100G-LR4-S Compatible Ethernet 100G QSFP28 Module 100GBASE-LR4, Single Mode, 10Km |
Customers Also Viewed
QSFP28-SR4 module, 100GBASE-SR4 850nm MMF 100m, with MPO Connector
100 Gigabit SR4 QSFP28 Transceiver | 100m MM 850nm 100 Gigabit SR4 QSFP28 Transceiver - 100m MM 850nm, with Monitoring (DDM / DOM), Standard MSA Multimode Transceiver for 100Gigabit Ethernet LAN...
Intelligent 10/100/1000 Ethernet Tap
Main Features Standard Network TAP (Online Monitor)Tap is inserted inline (Network ports A and B) and will collect traffic from a network link and allow you to monitor the data traffic into duplex...
TAPstack device with Multimode 1G/10G/25G SR Passive fiber TAPs
TAPstack is a Cost-Effective Family of TAP to improve network visibility in less space Key Features: 100% passive and fault-tolerant; No impact on traffic; No power source required. Secure: no...
HPE BladeSystem 455886-B21 Compatible 10GBASE-LR SFP+ 1310nm 10km DDM Transceiver Module
455886-B21 Compatible 10GBASE-LR SFP+ Transceiver Module (SMF, 1310nm, 10km, LC, DOM) Features SFP+ form factor 10G Ethernet transmission speed Low power consumption at <0.8W for SR,...
Edgecore AS5912-54X Baremetal Switch 48x10G SFP+, 6x100GE uplinks, BMC Qumran MX
Part Number Description: AS5912-54X, 48-Port 10G SFP+ with 6x100G QSFP28 uplinks, ONIE software installer, Broadcom Qumran 800Gbps with 8GB packet buffer, Intel Atom C2538 CPU,...
HPE J9151A Compatible 10GBASE-LR SFP+ 1310nm 10km DDM Transceiver Module
HPE J9151A Compatible 10GBASE-LR SFP+ Transceiver Module (SMF, 1310nm, 10km, LC, DOM) Features SFP+ form factor 10G Ethernet transmission speed Low power consumption at <0.8W for SR, <1W...
CyberMapper RTU Software license for Barefoot Tofino-32-based switches
CyberMapper Solution Requirements: § CyberMapper s/w running on a standard server (4-core X86 with mimum 16GB RAM, or better) § One or more NoviWare capable switches (Intel/Barefoot...
HPE BladeSystem 455883-B21 Compatible 10GBASE-SR SFP+ 850nm 300m DDM Transceiver Module
Features SFP+ form factor 10G Ethernet transmission speed 400m transmissions on OM4 multi-mode cable 300m transmissions on OM3 multi-mode cable 850nm wavelength HPE BladeSystem c-Class 10Gb...
EdgeCore 7712-32X 32-Port 100GBE QSFP28 SWITCH BRCM Tomahawk
Part Number Description: 32-Port 100GbE QSFP28 switch, ONIE software installer,BRCM Tomahawk with Intel Atom CPU, dual AC PSUs, power-to-port airflow, N. America power cord. 3-year...
32 x 400G QSFP-DD Switch Baremetal Switch with programmable Broadcom Trident 4
Product Overview S9310-32D 32 x 400G QSFP-DD Switch 32-port 400GE QSFP-DD 6-port 10GE SFP+ 1 10/100/1000 RJ-45 Mgt. port 1 x RJ45 + Micro USB serial console ports 1 x...
HPE J9150A Compatible 10GBASE-SR SFP+ 850nm 300m DDM Transceiver Module
Features SFP+ form factor 10G Ethernet transmission speed 400m transmissions on OM4 multi-mode cable 300m transmissions on OM3 multi-mode cable 850nm wavelength HPE J9150A...
Edgecore ASXVOLT16 XGS-PON VIRTUAL OPTICAL LINE TERMINAL
The ASXvOLT16 is a 16-10G-port XGS-PON virtual Optical Line Terminal (vOLT) with 4 x 100G/40G QSFP28 fixed ports. The 10G ports, 100G uplink ports, and console/management USB ports are all on the...