Product Description
The AGC9020S (AGC9020SL, non-TCAM version) is configured with 20x 100GbE QSFP28 uplinks. The device is pre-loaded with ONIE (Open Network Install Environment) ready to support the customers choice of modular extensible Network Operating Systems (NOS), 3-year Hardware Warranty
The AGC9020S is a high performance, high density next generation Spine switch with target application for Data Center and Carrier Networks. It has Twenty 100G QSFP28 for leaf switch connectivity. This switch provides deep buffer and large table support to fulfill the demand of tackling traffic bursts in Metro/Carrier applications. In addition to above features, the AGC9020S provides comprehensive support on layer 2 and layer 3 features, including SNMP, Spanning Tree, VLAN, QinQ, Trunk, QoS, RIP, OSPF, IGMP, DVMRP, PIM-DM, PIM-SM, Access Control, etc. This product which aims for Data Center Networks also supports advance features such as MPLS, TRILL, PFC, VEPA, QCN, VxLAN and NVGRE to meet the high-demanding Data Center high performance and virtualization requirement.
Key Features and Benefits
Ports
- 20x 100GbE QSFP28 ports
- 1x RJ-45 10/100/1000Mbps out-of-band management port
- 1x RJ-45 console port
- 1x RJ-45 BMC port
- 1x USB port
Performance
- Switching chip: Broadcom Jericho+
- Switching capacity: 1.8Tbps switching bandwidth
- Jumbo Frame support: Up to 12Kbyte
- MAC Address: Max 750K
Packet Buffer
- 16GB GDDR5 and 2 external T-CAM (AGC9020S)
- 16GB GDDR5 (AGC9020SL, non-TCAM version)
Synchronization Management Unit
- Synchronous Ethernet support
Security and Management
- TPM (Trusted Platform Module)
- BMC (Baseboard Management Controller)
Processor, Memories & Storage
- Processor: Intel Broadwell D1548
- SPI-Flash: 32MB
- Memory: 16GB x 2 DDR4-SDRAM
- Storage: m.2 128GB SSD
Power & Fan
- 4+1 redudant Fan modules
- 2 redudant, load-sharing, hot-swappable 1300W AC power supplies
- Input voltage : AC 100 ~ 240V
- Output voltage: DC 12V
- Compatible with 1300W DC power supply
Environmental specifications
- Operating temperature: 0 to 40℃
- Operating relative humidity: 10 to 90% RH
- Storage temperature: -20 to 70℃
- Storage humidity: 5 to 95% RH
Mechanical
- Dimension (WxDxH): 438.5x600x43 mm
- Weight: 13.36 kg
Regulatory Compliance
- Safety: EN 60950-1, UL/CSA 60950-1, IEC 60950-1re EU RoHS compliant
- Emissions: AS/NZS CISPR 22: Class A, ICES-003, Issue Class A, EN 55022: Class A, VCCI Class A, FCC CFR 47 Part 15, Subpart B Class A
- Immunity: EN 300 386, EN55024, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-5, EN 61000-4-6, EN61000-4-8, EN61000-4-11
- RoHS: All AG-Series components are EU RoHS compliant

Customers Also Viewed
Agema Delta AGC5648S 25G/100G QSFP28 SWITCH Broadcom Jericho+
The AGC5648S is configured with 48 x 25GbE SFP+28 ports and 6 high bandwidth 100GbE QSFP28 Uplinks. The device is pre-loaded with ONIE (Open Network Install Environment) ready to...
Agema Delta AGC7648A ToR/Leaf and EoR switch with deep buffer Broadcom Qumran-MX
The AGC5648S is configured with 48x 10GbE SFP+ and 6x 100GbE QSFP28 ports. The device is pre-loaded with ONIE (Open Network Install Environment) ready to support the customers choice...
Agema Delta AG9032 V2 100GbE TOR/Spine Switch Broadcom Trident 3
The Agema Open Networking Platform AG9032 V2 is configured with 1RU high-density 32x40/100GE QSFP28 + 2X10GE SFP+ Spine/TOR. The device is pre-loaded with ONIE (Open Network...
Agema Delta AG9064 64X100G QSFP28 SWITCH Broadcom Tomahawk2
The AG9064 with Broadcom Tomahawk2 provides 64 low latency 100GbE QSFP28 port connectivity. 2RU high-density 64X100GE QSFP28 ports. The device is pre-loaded with ONIE (Open Network...
Agema Delta AG9032 V1 100GbE TOR/Spine Switch Broadcom Tomahawk
The Agema Open Networking Platform AG9032 V1 is configured with 1RU high-density 32x40/100GE QSFP28 TOR/Spine Switch Broadcom Tomahawk . The device is pre-loaded with ONIE (Open Network...
Agema Delta AG5648V1 25G/100G QSFP28 SWITCH Broadcom Tomahawk+
The AGC5648V1 is configured with 48 x 25GbE SFP+28 ports and 6 high bandwidth 100GbE QSFP28 Uplinks. The device is pre-loaded with ONIE (Open Network Install Environment) ready to...
EdgeCore AS5916-54XKS Edge Switch, Broadcom Qumran, with external TCAM
Part Number Description: AS5916-54XKS with external TCAM, 48-Port 10G SFP+ with 6x100G QSFP28 uplinks, ONIE software installer, Broadcom Qumran 800Gbps with 8GB packet buffer, Intel Xeon®...
Agema Delta AG9032 V2A 100GbE TOR/Spine Switch Broadcom Trident 3
The Agema Open Networking Platform AG9032 V2A is configured with 1RU high-density 32x40/100GE QSFP28 + 1X10GE SFP+ Spine/TOR. The device is pre-loaded with ONIE (Open Network...
100GBE Baremetal Switch 64-Port 100G QSFP28 Tomahawk II
Product Overview The Edgecore AS7816-64Xis a Top-of-Rack (TOR) or spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 64 x QSFP28 ports,...
AS9716-32D 400 GBE DATA CENTER SWITCH BARE-METAL HARDWARE with BROADCOM TOMAHAWK III
The Edgecore AS9716-32D Broadcom Tomahawk 3 is a spine switch for high-performance data centers. The switch provides line-rate L2 and L3 switching across the 32 x QSFP-DD ports, each supporting 1 x...
AS7316-26XB Cell Site Gateway Bare-Metal Hardware, Broadcom Qumran
The AS7316-26XB and AS7315-27X-DCSG are temperature hardened and optimized for deployment in outside plant enclosures and support base stations with full IEEE 1588 timing and GPS functions, provide...
1000BASE-BX-D SFP SMF, TX1550nm/RX1310nm, 20km
Coming Soon...