Agema Delta AG9032 V1 100GbE TOR/Spine Switch Broadcom Tomahawk

Product Description

The Agema Open Networking Platform AG9032 V1 is configured with 1RU high-density 32x40/100GE QSFP28 TOR/Spine Switch Broadcom Tomahawk . The device is pre-loaded with ONIE (Open Network Install Environment) ready to support the customers choice of modular extensible Network Operating Systems (NOS), 3-year Hardware Warranty

The AG9032 v1 is a high performance, high density next generation switch with target application for Data Center Networks. It has Thirty-Two 100GbE QSFP28 ports which support 100GE Applications. In addition to the rich bandwidth, the AG9032 v1 provides comprehensive capability on layer 2 and layer 3 features support, including SNMP, Spanning Tree, VLAN, QinQ, Trunk, QoS, RIP, OSPF, IGMP, DVMRP, PIM-DM, PIM-SM, Access Control, etc. This product which aims for Data Center Networks also supports advance features such as MPLS,TRILL, PFC, VEPA, QCN, VxLAN and NVGRE to meet the high-demanding Data Center high performance and virtualization requirement. This product is good for Data Center Aggregation switch application.

Data Center Deployment

Key Features and Benefits

Ports

• 32x 100GbE QSFP28 ports
• 1x RJ45 100/1000BASE-T OOB management port
• 1x RJ45 Console Port
• 1x USB port

Performance

• Switching Chip: Broadcom Tomahawk BCM56960
• Switching Capacity: 3.2Tbps switching bandwidth (6.4Tbps Full Duplex)
• Forwarding rate: 4762 Mpps 
• Packet Buffer Memory: 16MB
• Jumbo Frame: Up to 12Kbyte
• MAC Address: Max 136K
• LPM Routes Support: 128K
• L3 Hosts: IPv4 Max 72K, IPv6 Max 36K
• VLAN IDs: 4K

Processor, Memories & Storage

• Processor: Intel Rangley C2538
• System Memory: 8GB DDR3
• SPI-Flash: 16 MB
• Storage: 128GB mSATA SSD
   

Supported Optical Transceivers and Cables

• 100GBASE-SR4
• 100GBASE-LR4
• 100G AOC
• 100G DAC
• 100G to 4x25G AOC
• 100G to 4x25G DAC
• 40G BASE-SR
• 40G BASE-LR4
• 40G BASE AOC
• 40G BASE DAC
• 40G to 4x10G AOC
• 40G to 4x10G DAC

Power & Fan

• 4+1 redundant fan modules
• 2  redundant, load-sharing, hot-swappable 800W AC power supplies
• Input voltage : AC 100 ~ 240V
• Output voltage: DC 12V
• Power consumption: Typical 463.8W; Max. 636.64W
  *Compatible with 800W DC power supply

Environmental specifications

• Operating temperature: 0 to 40℃
• Operating relative humidity: 10 to 90% RH
• Storage temperature: -20 to 70℃
• Storage humidity: 5 to 95% RH

Mechanical:

• Dimensions (WxDxH): 438.5x460x43 mm
• Weight: 8.3 kg

Regulatory Compliance

• Safety: EN 60950-1, UL/CSA 60950-1, IEC 60950-1
• Emissions: AS/NZS CISPR 22: Class A, ICES-003, Issue Class A, EN 55022: Class A, VCCI Class A, FCC CFR 47 Part 15, Subpart B Class A
• Immunity: EN 300 386, EN55024, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-5, EN 61000-4-6, EN61000-4-8, EN61000-4-11
• RoHS: All AG-Series components are EU RoHS compliant.