Product Description

Universal 100 Gigabit LR4 QSFP28 Transceiver - 10km SM 1295, 1300, 1305 & 1310nm, with Monitoring (DDM / DOM), Standard MSA Singlemode Transceiver for 100Gigabit Ethernet LAN and 100G EDR with LC connector. They can be used in virtually any type of communication systems (e.g. routers, switches, converters, hubs, bridges, NICs, gateways, proxys, load balancers, etc.). 

Features

• Part of the Universal QSFP28 Transceiver family and is therefore ideal for flexible and cost-optimized high-speed optical network deployments.
• The SM 1295, 1300, 1305 & 1310nm EML optic with PIN receiver complies with Class 1 Standard of the International Safety Standard IEC60825
• Offers a power budget of 4.3dB for distances of up to 10km via G.652 Singlemode fiber.
• The system status of the Universal QSFP28 can be monitored in real time via the transceiver´s dynamic monitoring data (also known as DDM or DOM).
• Parameters which can be monitored are; transmitter power level, receiver sensitivity and the operating temperature.
• FORM FACTOR TYPE QSFP28
• INTERFACE Singlemode
• WAVELENGTH TX 1295.56nm
• WAVELENGTH RX 1310nm
• DISTANCE 10km
• POWERBUDGET (DB) 4.30dB
• PROTOCOLS 100G EDR, 100Gigabit Ethernet LAN
• BANDWIDTH FROM 25.781Gbit/s
• BANDWIDTH TO 103.125Gbit/s
• LASER EML
• RECEIVER TYPE PIN
• CONNECTOR LC
• WAVELENGTH TX MIN. 1294.53nm
• WAVELENGTH TX MAX. 1296.59nm
• WAVELENGTH RX MIN. 1294.56nm
• WAVELENGTH RX MAX. 1310.19nm
• TRANSMIT MIN. -4.30dBm
• TRANSMIT MAX. 4.50dBm
• RECEIVE MIN. -8.60dBm
• RECEIVE MAX. (RECEIVER OVERLOAD) 4.50dBm
• TEMPERATURE (MIN) 0°C
• TEMPERATURE (MAX) 70°C
• TYPE OF DDM / DOM internal
• EXTINCTION RATIO 4dB

Direct or within rack cabling (Intra-Rack) examples

Singlemode 100GBASE-LR4 Connectivity using Fiber Patch Cable

The following Figure shows a direct connectivity between two switches using 100GBASE-LR4 QSFP28 transceivers connected by 1x single mode LC to LC fiber patch cable.