Product Description
Key Features
- 90W max for each port (full load with 52V DC input voltage) 720W max per switch
- Support Perpetual PoE and PoE watchdog
- 8*10/100/1000Base-T PoE++ RJ-45 ports
- 2*1000 Base-X SFP ports
- 1*RS-232 console port (115200,8,N,1)
- Configuration: Web Console, Telnet, CLI
- 6kV surge immunity
- 8kV air discharge ESD protection
- Relay alarm for cable link down and PoE link down
- Fan-less metal shell design
- DIN-rail/wall mounted/desktop installation
Layer 2 Network Features
- Supports IGMP v1/v2/v3,
- Supports QoS (IEEE 802.1p) and CoS/ToS
- Supports IEEE 802.1Q VLAN, SNMP v1/v2c
- IPv6
- Network Redundancy Support/Fast Ring: RSTP and ERPS v1/v2 (Recovery Time <20ms)
- One-key smart mode: CCTV, LOCK, RING, ONLINE
-
Related Products
INDUSTRIAL GIGABIT POE+ MANAGED SWITCH 8*10/100/1000Tx PoE+ 30W/Port, 4*100/1000 SFP
Key Features Multi-port PoE+ switches • EN-MSWG-0804S-PE+ Supports 8*10/100/1000Tx IEEE 802.3af/at Compliant with 30W/Port, and 4*100/1000 SFP Slots Intelligent PoE Technology Enhanced L2+...
Customers Also Viewed
INDUSTRIAL 10G POE+ MANAGED SWITCH 16*10/100/1000Tx PoE+ 30W/Port, 4*1G/10G SFP+
Key Features Multi-port PoE+ switches • EN-ML3ISW10G-1604S-PE+ L3 Industrial 10G Managed switch supports 16*10/100/1000Tx PoE+ 30W/Port, 4*1G/10G SFP+ Intelligent PoE...
INDUSTRIAL 10G POE+ MANAGED SWITCH 8*10/100/1000Tx PoE+ 30W/Port, 4*1G/10G SFP+
Key Features Multi-port PoE+ switches • EN-ML3ISW10G-0804S-PE+ L3 Industrial 10G Managed switch supports 8*10/100/1000Tx PoE+ 30W/Port, 4*1G/10G SFP+ Intelligent PoE...
INDUSTRIAL GIGABIT POE+ MANAGED SWITCH 8*10/100/1000Tx PoE+ 30W/Port, 4*100/1000 SFP
Key Features Multi-port PoE+ switches • EN-MSWG-0804S-PE+ Supports 8*10/100/1000Tx IEEE 802.3af/at Compliant with 30W/Port, and 4*100/1000 SFP Slots Intelligent PoE Technology Enhanced L2+...
PoEstack Industrial PoE++ (90W) Repeater, pack of 5x units
Key Features This series contains three models: 1xPoE output port, maximum input power 60W. 2xPoE output ports, maximum input power 60W. 2xPoE output ports, maximum input power 90W...
Edgecore 5835-54X 10G/100G DATA CENTER SWITCH 48x10G SFP+ with 6x40/100G QSFP+ uplinks, Trident III (TD3)
Product Overview The Edgecore AS5835-54X switch meets the high-performance, availability, and network-scaling requirements of enterprise and cloud data centers. The AS5835-54X provides full...
PoEstack 10/100 Mbps PoE Repeater, pack of 5x units
Key Features PoE Input Port: 10/100Base-Tx RJ45,IEEE 802.3af/at PD port, 30W max PoE Output Port: 2*10/100Base-Tx RJ45,IEEE 802.3af/at PSE port.25W max(including DC out) uses...
INDUSTRIAL GIGABIT POE+ MANAGED SWITCH 4*10/100/1000Tx PoE+ 30W/Port, 2*100/1000 SFP
Key Features Multi-port PoE+ switches • EN-MSWG-0402S-PE+ Supports 4*10/100/1000Tx IEEE 802.3af/at Compliant with 30W/Port, and 2*100/1000 SFP SlotsIntelligent PoE Technology Enhanced L2+...
XGS-PON ONT/ONU SFP+ with LC/UPC Connector
Product Specs 2x10 SFP+ electrical interface with LC/UPC (Blue Latch) or SC/APC (Green Latch) receptacle optical interface Single fiber XGS-PON ONT/ONU Transceiver 1270nm burst-mode 9.95328Gbps,...
400G-LR4 QSFP-DD transceiver, 10km over duplex SMF, LC Connector
400GBASE-FR4 transceiver, up to 10km over duplex SMF, LC Connector, EML CWDM4 PRODUCT FEATURES QSFP-DD MSA compliant 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-LR4 Specification...
400G-FR4 QSFP-DD transceiver, 2km over duplex SMF, LC Connector, EML CWDM4
400GBASE-FR4 transceiver, up to 2km over duplex SMF, LC Connector, EML CWDM4 PRODUCT FEATURES QSFP-DD MSA compliant 4 CWDM lanes MUX/DEMUX design 100G Lambda MSA 400G-FR4 Specification...
QSFP-DD 4x 100G FR1 optical transceiver Parallel SMF MPO-12 Angled Connector (APC)
400GBASE-DR4 QSFP-DD transceiver, up to 2km over parallel single mode fiber (SMF). The 400G-xDR4 can break out to 4 x 100G, and interop with 4 x 100G-FR QSFPs. Parallel SMF MPO-12 Angled Connector...
Intelligent High Density Copper TAP 8x10/100/1000 Ethernet Tap
Main Features Standard Network TAP (Online Monitor) Tap is inserted inline (Network ports A and B) and will collect traffic from a network link and allow you to monitor the data traffic into duplex...